Summer Starts Here - Save up to 70%
Rola Rail Extreme DFE Series Roof Rack Installation - 2009 Dodge Ram Pickup- Video
Hey guys, it's Randy here at etrailer.com. We've got an '09 Ram 1500 and put in a few different roof rack systems on it. This one happens to be from Rola. This is going to offer 60 inch elliptical style crossbars. You can see the crossbars nice and aerodynamic shape really helps to reduce any wind noise. There's diffuser strips that are going to come with it to fill in this little area here and also a built-in strip right here, again, helping to reduce the wind noise.Now, the kit's going to contain your crossbar, as we said, 60 inches there. more
5/17/2019 9:53:13 AM
Thule Roof Rack Review - 2007 Dodge Ram Pickup- Video
Today on our 2007 Dodge Ram, we're going to be doing a test fit of the Thule AeroBlade Roof Rack System. As you can see, we've already got one of them up on our vehicle, so you can see what the front cross bar would look like. We're going to show you how to place on that rear cross bar, and how everything fits together. You're going to have your AeroBlade, which is going to be part number THARB60. Your foot pack or your pedestal, which is going to be part number TH480R, and then your fit kit, which is also going to have your mounting bracket, which is already up on the vehicle. We'll show you how that goes in, as well as the foot pad and the clip that mounts to the bracket. more
5/21/2015 4:01:28 AM
Whispbar Flush Bar Roof Rack Installation - 2013 Dodge Ram Pickup- Video
Today on our 2013 Dodge Ram Pickup well be test fitting the Whispbar Flush Bar Roof Rack System using part numbers wb-s11 and wb-k548. With our roof rack system assembled according to the instructions, well begin our test fit by opening both front doors. Well place our front bar onto the front part of our roof. To ensure that we have this in the correct location, we need to measure 30 centimeters from the door jamb to the center of our foot pack. Well do this measurement on both the passenger and driver side of the vehicle to make sure that our feet are in line with each other. Well then use the included Allen key to tighten down the Allen bolt which will secure each foot pack. more
6/19/2013 2:22:01 PM
Whispbar Through Bar Roof Rack Installation - 2013 Dodge Ram Pickup- Video
Today on our 2013 Dodge Ram Pickup well be test fit in the Whispbar Through Bar Roof Rack system using part number WB-S18 and the Custom Kit for Whispbar Flush Bars part number WB-K548. Weve already got our roof rack system assembled according to the instructions. To begin our test fit well go ahead and place our front bar on to the front part of our roof. To ensure that we have it in the correct location we need to measure 30 centimeters from the doorjamb to the center of our clamp. Well do this on both the passenger and driver side of the vehicle to measure are fit or in line with each other. Once we have our bar in the correct location we can then use the included Allen key toll to tighten our bolt which will secure our bar in place. more
6/18/2013 4:00:41 PM
Rhino-Rack 2500 Series Aero Roof Rack Installation - 2013 Dodge Ram Pickup- Video
Today on our 2013 Dodge Ram 1500, we'll be test fitting the Rhino-Rack 2500 Series roof rack with Aero crossbars, 59" inches in length, black in color, part numbers DA1500B, and DK043. We'll begin our test fit by placing the front crossbar onto the front of our roof. We'll then need to measure from the center of the door jam to the center of our crossbar. We'll measure this on both the passenger and driver's side of the vehicle to ensure the front crossbar is in its correct position. Once we've established this position, we can use the included Allen key to tighten down the black bolts on the inside of the feet, to secure the front crossbar to the front of our roof. Now you may want to alternate when tightening it down so that one foot doesn't favor one side of the vehicle. more
6/18/2013 11:09:31 AM
Yakima Q Tower Roof Rack Installation - 2013 Dodge Ram- Video
Today on our 2013 Dodge Ram 1500, we'll be test fitting the Yakima roof rack system. We'll be using the 58" cross bars, part number Y00409, the Yakima Q towers, part number Y00124, and the Q clips specific to this vehicle, part number Y00607. Now we already have our cross bars assembled according to the instructions, and we're ready to fit them up on our vehicle. The first thing we need to do is open the driver and passenger side doors in the front. We'll set the front cross bar assembly up on top of our roof and get it into position. To position it properly, we need to measure 10" from the leading edge of the Q tower base to the edge of our windshield glass. more
4/15/2013 9:23:16 AM
Filter Videos
Filter Videos
